Mail Thread Index
- (7) ,
- (0) Okay...., Russell Nelson
- (1) Re: testing..., Theodore C. Yapo
- (1) That mysterious QuickCam, Wim Lewis
- (0) subscribe, David D. Chow
- (2) Low-level protocols for the QuickCam (fw, David D. Chow
- (0) crack open case?, David D. Chow
- (0) Re: crack open case?, Wim Lewis
- (0) No Subject, Thomas 'Dent' Mirlacher
- (0) Mac serial port speed, Adam L. Seligman
- (0) subscirbe, Thomas Davis
- (0) (no subject), Louis Swart
- (0) No Subject, Gustav "Gurre" Kalvesten
- (0) subscribe, Ahmad Darwish
- (1) What should the driver output?, Thomas Davis
- (0) QuickPict...., Thomas Davis
- (0) subscribe, John Shafer
- (0) unsubscribe, Ahmad Darwish
- (0) subscribe, Ahmad Darwish
- (0) subscribe, THE Roundman
- (0) unsubscribe, Ahmad Darwish
- (0) subscribe, Todd Larsen
- (1) Something from Connectix..., Todd Larsen
- (1) Late Xmas gift.., Thomas Davis
- (0) subscribe, jadylson bomfim
- (0) suscribe, Eduardo Diaz Comellas
- (1) Foolish Me..., mlald
- (0) Tip for you port tracers..., mlald
- (0) I've got it scanning..., Scott Laird
- (1) 'qcam' available via FTP., Scott Laird
- (0) fix for Wine 951212.., Thomas Davis
- (1) forgot something.., Thomas Davis
- (1) And now.., Thomas Davis
- (0) subscribe, Roger A. Unwin
- (2) Success/failure?, Scott Laird
- (0) Re: Success/failure?, Paul Chinn
- (1) This is fun!, mlald
- (0) Re: Re: 'qcam' available via FTP., Anthony Rumble
- (1) QCAM 0.1 now available, Scott Laird
- (0) Brightness, Contrast, WB settings, Adam L. Seligman
- (0) Qcam + linux on the web!, Roger A. Unwin
- (2) Xwindows Qcam movies, Paul Chinn
- (1) Re: Aha! Checksums?, Paul Chinn
- (0) subscribe, Robert Kuhn
- (0) Re: Xwindows Qcam movies, Paul Chinn
- (0) Re: QCAM 0.1 now available, Anthony Rumble
- (1) QCAM 0.2 now available, Scott Laird
- (1) Re: QCAM 0.2 now available, root
- (0) Three adjustable cameras!!, David D. Chow
- (0) Re: QCAM 0.2 now available, Paul Chinn
- (0) Re: QCAM 0.2 now available, Paul Chinn
- (0) subscribe, James W. Bennett
- (0) continuous frames!, David D. Chow
- (1) Re: continuous frames!, root
- (0) YAQCOTW: http://www.abies.com/~guru/qcam, Guru Aleph-Null
- (0) Next release delayed, Scott Laird
- (2) full X control QuickCam, Paul Chinn
- (0) tricky camera, Paul Chinn
- (1) My version of the Linux Quickcam drivers, Thomas Davis
- (0) Re: 16/24-bit color mode?, Paul Chinn
- (1) new qcam discoveries, Paul Chinn
- (0) Lengthening Main Cable, Lee Maisel
- (1) nuke flare, Paul Chinn
- (0) Lengthening Main Cable, Lee M. Maisel
- (2) Is there a picture ??, Paul Rensel
- (1) It works..., Paul Rensel
- (0) NV and the QuickCam, mlald
- (1) Pictures from the Netherlands, Paul Rensel
- (0) Auto Adjust Feature, Lee M. Maisel
- (0) RE: Auto Adjust Feature, Paul Chinn
- (0) RE: Auto Adjust Feature, Lee M. Maisel
- (0) no picture on 320*240 ?, Paul Rensel
- (2) automagic brightness, Roger A. Unwin
- (1) suggestion, Russell Nelson
- (1) Re: QCAM 0.3 now available., David D. Chow
- (0) Editing qcam-Linux.c, Steve Philp
- (0) subscribe, Stahlhut, Todd A.
- (0) Telescope, Lee M. Maisel
- (1) RE: suggestion, Lee M. Maisel
- (0) Wine filter / also: continuous frames is, Paul Chinn
- (0) Special Cable on Qcam, Lee M. Maisel
- (0) Check it out, Lee M. Maisel
- (0) Missing commmands., Scott Laird
- (1) No Subject, Phil Shaffer
- (1) live qcam video on web: server push, T.Wagner
- (0) Huzzah for xqcam!, Russell Nelson
- (0) Extending the cable, and CUSEEME., Bill
- (0) qcam on NetBSD, Wim Lewis
- (1) qcam on NetBSD, Roger A. Unwin
- (0) I got it working!, Lars
- (0) No Subject, D S Banarse
- (0) forwarded message from Thomas Davis, Russell Nelson
- (1) Re: qcam on DOS, Way Sun
- (1) xqcam speed figures, Wim Lewis
- (1) Re: qcam on NetBSD, Bruce Janson
- (1) remote control, Bruce Janson
- (0) forwarded message from MIHL@wvnvm.wvnet., Russell Nelson
- (0) Improved Iggy Page, Lee Maisel
- (0) Speed, and remote control, Wim Lewis
- (0) forwarded message from MIHL@wvnvm.wvnet., Russell Nelson
- (0) Problems using QuickCam w/ new IO card.., Steve Philp
- (0) new kernel module..., Thomas Davis
- (1) xfqcam 1.0 released, Paul Chinn
- (0) No Subject, Kent Thompson
- (1) Re: xfqcam 1.0 released, Paul Chinn
- (0) Re: xfqcam 1.0 released, Wim Lewis
- (1) erk! qfcam 1.0 is hosed in unidirectiona, Paul Chinn
- (0) fix for unidir xfqcam, Paul Chinn
- (2) xfqcam 1.01, Paul Chinn
- (1) anyone workin' on NV?, Paul Chinn
- (1) stuff, Russell Nelson
- (0) Re: stuff, Paul Chinn
- (0) qclose hack, Brent Earl
- (1) system load causing white flashes, Paul Chinn
- (2) quiet list, Paul Chinn
- (0) CUSEEME?, Bill
- (1) re: load brightness, videoconferencing, Paul Chinn
- (0) vic for linux with qcam, Koji OKAMURA
- (2) Re: quiet list, Thomas Davis
- (0) Re: quiet list, James W. Bennett
- (0) NV Patches.. please submit them to me, Anthony Rumble
- (0) subscribe tserreyn@uucom.com, Ted Serreyn
- (1) re: load & brightness, Paul Chinn
- (0) Frame Rate, Adam L. Seligman
- (0) Re: Frame Rate, Paul Chinn
- (0) NV binaries for linux available, Anthony Rumble
- (1) shocking discovery on par with polio vac, Paul Chinn
- (0) I/R with the quickcam, Nat Friedman
- (1) I/R with the qcam, Nat Friedman
- (0) IR, Bob Maccione
- (2) stepper motor and swivel?, Brent Earl
- (0) Auto Brightness control, Kaj Groner
- (0) Auto-Brightness, Jonathan Bradshaw
- (1) Re: Auto-Brightness, Paul Chinn
- (1) Auto-bright, Frame Rate, and success!, root
- (0) Re: Auto-Brightness, Lee M. Maisel
- (1) mpeg encoder, Paul Chinn
- (0) xfqcam 1.02, Paul Chinn
- (0) Re: Quickcam not found with XFqcam!!, Lee M. Maisel
- (1) Re: mpeg encoder, Nelson Minar
- (0) Re: Quickcam not found with XFqcam!!, Nelson Minar
- (0) Re: Auto-brightness, Nelson Minar
- (1) XFqcam, Jonathan Bradshaw
- (0) unsubscribe, Theodore C. Yapo
- (0) xfqcam not auto detecting cameras, Paul Chinn
- (0) Re: xfqcam not auto detecting cameras (f, Thomas Davis
- (1) Re: XFqcam, Jon Lewis
- (0) unsubscribe, James Antoniou
- (0) Re: XFqcam, Scott Laird
- (0) No Subject, Thomas 'Dent' Mirlacher
- (0) Greetings all, how about a mirror?, Adam W. Dace
- (0) How to do CU-SeeMe under Linux, Nelson Minar
- (0) No Subject, Oliver Hager
- (1) disk dilema, Paul Chinn
- (3) Update on CU-SeeMe, Nelson Minar
- (0) CU-SeeMe: vdorm.taponline.com reflector, Nelson Minar
- (1) so, what now?, Nelson Minar
- (0) Cuseeme reflector up and running?, Adam W. Dace
- (1) Xfqcam problem, FYI., Frank Mayhar
- (2) Decoding in bidirectional mode: 4bpp?, Nelson Minar
- (0) ., BILL FLEMING
- (0) Problem with QC... White picture?, Steve Philp
- (2) real-world experience with QuickCam in t, Paul Traina
- (1) Re: real-world experience with QuickCam , Sujal Patel
- (0) CUSEEME, SEEME, but no CU., Bill
- (0) autodetection works 100% of the time for, Paul Traina
- (1) More stuff..., Thomas Davis
- (1) Linux module v0.1, Thomas Davis
- (0) Subscribe, Jim Ryan
- (1) RE: More stuff... (fwd), Sgt Daniel W. Erskine
- (0) mail failed, returning to sender (fwd), discursive melancholia
- (0) No Subject, Sgt Daniel W. Erskine
- (1) Re: (no subject), David Stewart
- (0) QuickCam Info, Brooks G. Dorroh
- (0) unsubscribe, David Stewart
- (0) Administrivia, nelson
- (0) CUSEEME under Wine?, Bill
- (1) FAQ ?, Aram Mirzadeh
- (0) quickcam...., Jauder Ho
- (1) New QuickCam picture site, Jon Lewis
- (0) Screensaver, Adam L. Seligman
- (0) trip cam page, Brent Earl
- (0) No Subject, Dave Mitchell
- (4) configuration help, Aram W. Mirzadeh
- (0) bidirectional madness, Dave Mitchell
- (0) 4bpp bidirectional mode, Nelson Minar
- (0) unsubscribe, Ben Sinclair
- (0) Re: configuration help, Aram W. Mirzadeh
- (0) Re: bidirectional madness, Dave Mitchell
- (0) (U) qcam with AIX and QuickCam plug size, Neil Kolban
- (0) (U) Changes required for AIX qcam librar, Neil Kolban
- (1) FreeBSD nv & vic patches, Peter Grehan
- (0) qcam for FreeBSD -- packaged, Adam W. Dace
- (1) By jove it works!, Adam W. Dace
- (0) xqcam question, discursive melancholia
- (1) Yes!, nelson
- (1) Is the list dead?, Lee M. Maisel
- (0) Re: Is the list dead?, Brandon High
- (1) linux/python quickcam, Dave Mitchell
- (1) Help, Jon Lewis
- (0) frameserv and clients, matthew c. mead
- (1) Quickcam to ethernet, via stripped Linux, Paul Haas
- (0) qcframeserv very pre-alpha, matthew c. mead
- (0) WICKED!! Q-cam SERVER!, Martian
- (1) Creation of Drivers for other UNIX Works, Michael W. Chalkley
- (0) subscribe, Heiko Rath
- (0) Re: Creation of Drivers for other UNIX W, Michael W. Chalkley
- (1) My QuickCam on the Web (a little differe, Jered J Floyd
- (1) More about my QuickCam, live server push, Jered J Floyd
- (2) Quickcam stereo..., Kent Thompson
- (1) anyone gotten information from Connectix, Paul Traina
- (0) OS independant QuickCam driver (FreeBSD , Paul Traina