Mail Index

• Thread Index

• • From:
• Okay....
  • From: nelson@crynwr.com (Russell Nelson)
• Re: testing...
  • From: "Theodore C. Yapo" <yapot@ix.netcom.com>
• Re: testing...
  • From: nelson@crynwr.com (Russell Nelson)
• That mysterious QuickCam
  • From: Wim Lewis <wiml@hhhh.org>
• That mysterious QuickCam
  • From: nelson@crynwr.com (Russell Nelson)
• subscribe
  • From: chow@cc.gatech.edu (David D. Chow)
• Low-level protocols for the QuickCam (fwd)
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: Low-level protocols for the QuickCam (fwd)
  • From: "Edward C. Bailey" <ed@pigdog.niehs.nih.gov>
• Low-level protocols for the QuickCam (fwd)
  • From: nelson@crynwr.com (Russell Nelson)
• Re: Low-level protocols for the QuickCam (fwd)
  • From: chow@cc.gatech.edu (David D. Chow)
• crack open case?
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: crack open case?
  • From: Wim Lewis <wiml@hhhh.org>
• No Subject
  • From: "Thomas 'Dent' Mirlacher" <dent@wst.edvz.sbg.ac.at>
• Mac serial port speed
  • From: "Adam L. Seligman" <adams@cs.utexas.edu>
• subscirbe
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• (no subject)
  • From: Louis Swart <louisswart@ist.co.za>
• No Subject
  • From: Gustav "Gurre" Kalvesten <a94guska@ida.his.se>
• subscribe
  • From: Ahmad Darwish <ahmad@trail.com>
• What should the driver output?
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• QuickPict....
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• What should the driver output?
  • From: nelson@crynwr.com (Russell Nelson)
• subscribe
  • From: john@hax.com (John Shafer)
• unsubscribe
  • From: Ahmad Darwish <ahmad@trail.com>
• subscribe
  • From: Ahmad Darwish <darwich@trail.com>
• subscribe
  • From: THE Roundman <roundman@wichita.fn.net>
• unsubscribe
  • From: Ahmad Darwish <ahmad@trail.com>
• subscribe
  • From: Todd Larsen <larsen@bit.csc.lsu.edu>
• Something from Connectix...
  • From: Todd Larsen <larsen@bit.csc.lsu.edu>
• Something from Connectix...
  • From: nelson@crynwr.com (Russell Nelson)
• Late Xmas gift..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: Late Xmas gift..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• subscribe
  • From: jadylson bomfim <jadylson@Montreal.com.br>
• suscribe
  • From: Eduardo Diaz Comellas <diaz@lander.es>
• Foolish Me...
  • From: mlald@homer.ncm.com
• Re: Foolish Me...
  • From: scott@laird.com (Scott Laird)
• Tip for you port tracers...
  • From: mlald@homer.ncm.com
• I've got it scanning...
  • From: scott@laird.com (Scott Laird)
• 'qcam' available via FTP.
  • From: scott@laird.com (Scott Laird)
• Re: 'qcam' available via FTP.
  • From: mlald@homer.ncm.com
• fix for Wine 951212..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• forgot something..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: Foolish Me...
  • From: nelson@crynwr.com (Russell Nelson)
• And now..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Wow! Great progress!
  • From: nelson@crynwr.com (Russell Nelson)
• Re: forgot something..
  • From: scott@laird.com (Scott Laird)
• Re: Foolish Me...
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: Foolish Me...
  • From: scott@laird.com (Scott Laird)
• Re: Foolish Me.........
  • From: chow@cc.gatech.edu (David D. Chow)
• subscribe
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• Re: Foolish Me...
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Success/failure?
  • From: scott@laird.com (Scott Laird)
• Re: Success/failure?
  • From: Paul Haas <paulh@hamjudo.com>
• Re: Success/failure?
  • From: loomer@1000klub.com (Paul Chinn)
• Re: Success/failure?
  • From: scott@laird.com (Scott Laird)
• Re: Success/failure?
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: Success/failure?
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: Success/failure?
  • From: Jani Mattsson <jmattsso@niksula.hut.fi>
• This is fun!
  • From: mlald@homer.ncm.com
• Re: Re: 'qcam' available via FTP.
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• Re: This is fun!
  • From: scott@laird.com (Scott Laird)
• QCAM 0.1 now available
  • From: scott@laird.com (Scott Laird)
• Brightness, Contrast, WB settings
  • From: "Adam L. Seligman" <adams@cs.utexas.edu>
• Qcam + linux on the web!
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• QCAM 0.1 now available
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.1 now available
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.1 now available
  • From: nelson@crynwr.com (Russell Nelson)
• Xwindows Qcam movies
  • From: loomer@1000klub.com (Paul Chinn)
• Aha! Checksums?
  • From: nelson@crynwr.com (Russell Nelson)
• Re: Aha! Checksums?
  • From: loomer@1000klub.com (Paul Chinn)
• subscribe
  • From: Robert Kuhn <rkuhn@isisph.com>
• Re: Xwindows Qcam movies
  • From: loomer@1000klub.com (Paul Chinn)
• Re: Aha! Checksums?
  • From: scott@laird.com (Scott Laird)
• Re: Xwindows Qcam movies
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.1 now available
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• QCAM 0.2 now available
  • From: scott@laird.com (Scott Laird)
• QCAM 0.2 now available
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.2 now available
  • From: root <root@martian.rt66.com>
• Re: QCAM 0.2 now available
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.2 now available
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.2 now available
  • From: chow@cc.gatech.edu (David D. Chow)
• Three adjustable cameras!!
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: QCAM 0.2 now available
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.2 now available
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.2 now available
  • From: loomer@1000klub.com (Paul Chinn)
• Re: QCAM 0.2 now available
  • From: loomer@1000klub.com (Paul Chinn)
• subscribe
  • From: "James W. Bennett" <jimb@tara-lu.com>
• Re: QCAM 0.2 now available
  • From: James Walter Martin III <jwm3@jwm3.org>
• continuous frames!
  • From: chow@cc.gatech.edu (David D. Chow)
• live from Jim's room
  • From: James Walter Martin III <jwm3@jwm3.org>
• Re: QCAM 0.2 now available
  • From: scott@laird.com (Scott Laird)
• Re: continuous frames!
  • From: root <root@martian.rt66.com>
• Re: continuous frames!
  • From: scott@laird.com (Scott Laird)
• YAQCOTW: http://www.abies.com/~guru/qcam/
  • From: Guru Aleph-Null <guru@telum.abies.com>
• Next release delayed
  • From: scott@laird.com (Scott Laird)
• full X control QuickCam
  • From: loomer@1000klub.com (Paul Chinn)
• Re: full X control QuickCam
  • From: chow@cc.gatech.edu (David D. Chow)
• tricky camera
  • From: loomer@1000klub.com (Paul Chinn)
• Re: full X control QuickCam
  • From: scott@laird.com (Scott Laird)
• My version of the Linux Quickcam drivers..
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• 16/24-bit color mode?
  • From: retsla <alster@interport.net>
• Re: 16/24-bit color mode?
  • From: scott@laird.com (Scott Laird)
• Re: 16/24-bit color mode?
  • From: loomer@1000klub.com (Paul Chinn)
• new qcam discoveries
  • From: loomer@1000klub.com (Paul Chinn)
• Re: new qcam discoveries
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Lengthening Main Cable
  • From: Lee Maisel <lmm@dst2mail.nmcjnet.org>
• nuke flare
  • From: loomer@1000klub.com (Paul Chinn)
• Lengthening Main Cable
  • From: "Lee M. Maisel" <lmm@dst2mail.nmcjnet.org>
• Is there a picture ??
  • From: Paul Rensel <paul@ixs.nl>
• Is there a picture ??
  • From: nelson@crynwr.com (Russell Nelson)
• Re: Is there a picture ??
  • From: "Oliver (?)" <oliver@AEC.at>
• Re: nuke flare
  • From: James Walter Martin III <jwm3@jwm3.org>
• It works...
  • From: Paul Rensel <paul@ixs.nl>
• NV and the QuickCam
  • From: mlald@homer.ncm.com
• It works...
  • From: nelson@crynwr.com (Russell Nelson)
• Pictures from the Netherlands
  • From: Paul Rensel <paul@ixs.nl>
• Re: Pictures from the Netherlands
  • From: Jani Mattsson <jmattsso@niksula.hut.fi>
• Auto Adjust Feature
  • From: "Lee M. Maisel" <martian@rt66.com>
• RE: Auto Adjust Feature
  • From: Paul Chinn <loomer@1000klub.com>
• Re: Pictures from the Netherlands
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• RE: Auto Adjust Feature
  • From: "Lee M. Maisel" <martian@rt66.com>
• no picture on 320*240 ?
  • From: Paul Rensel <paul@ixs.nl>
• automagic brightness
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• Re: automagic brightness
  • From: chow@cc.gatech.edu (David D. Chow)
• suggestion
  • From: nelson@crynwr.com (Russell Nelson)
• Re: suggestion
  • From: retsla <alster@interport.net>
• Re: automagic brightness
  • From: scott@laird.com (Scott Laird)
• Re: QCAM 0.3 now available.
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: QCAM 0.3 now available.
  • From: scott@laird.com (Scott Laird)
• Re: automagic brightness
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.3 now available.
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.3 now available.
  • From: Paul Haas <paulh@hamjudo.com>
• Editing qcam-Linux.c
  • From: Steve Philp <sphilp@mail.alliance.net>
• Re: Is there a picture ??
  • From: Russell Brown <russell@lutton.lls.com>
• Re: QCAM 0.3 now available. NEW AND IMPROVED PAGE!
  • From: chow@cc.gatech.edu (David D. Chow)
• subscribe
  • From: "Stahlhut, Todd A." <stahlht@po2.nawc-ad-indy.navy.mil>
• Re: QCAM 0.3 now available.
  • From: nelson@crynwr.com (Russell Nelson)
• Re: QCAM 0.3 now available.
  • From: scott@laird.com (Scott Laird)
• Telescope
  • From: "Lee M. Maisel" <martian@rt66.com>
• RE: suggestion
  • From: "Lee M. Maisel" <martian@rt66.com>
• Wine filter / also: continuous frames issues
  • From: Paul Chinn <loomer@1000klub.com>
• RE: suggestion
  • From: retsla <alster@interport.net>
• Special Cable on Qcam
  • From: "Lee M. Maisel" <martian@rt66.com>
• Check it out
  • From: "Lee M. Maisel" <martian@rt66.com>
• Missing commmands.
  • From: scott@laird.com (Scott Laird)
• No Subject
  • From: Phil Shaffer <pshaffer@umbra.arch.bsu.edu>
• how to get off the list.
  • From: nelson@crynwr.com (Russell Nelson)
• Re: live qcam video on web: server push
  • From: retsla <alster@interport.net>
• live qcam video on web: server push
  • From: T.Wagner@trier.fh-rpl.de
• Huzzah for xqcam!
  • From: nelson@crynwr.com (Russell Nelson)
• Re: Success/failure?
  • From: Paul Haas <paulh@hamjudo.com>
• Computer display as strobe light messes up brightness
  • From: Paul Haas <paulh@hamjudo.com>
• Extending the cable, and CUSEEME.
  • From: Bill <bill@xmission.com>
• qcam on NetBSD
  • From: Wim Lewis <wiml@hhhh.org>
• qcam on NetBSD
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• I got it working!
  • From: Lars <lars@aleph0.mit.edu>
• No Subject
  • From: D S Banarse <dbanarse@sees.bangor.ac.uk>
• Re: qcam on NetBSD
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: qcam on NetBSD
  • From: nelson@crynwr.com (Russell Nelson)
• forwarded message from Thomas Davis
  • From: nelson@crynwr.com (Russell Nelson)
• Re: qcam on NetBSD
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: qcam on DOS
  • From: Way Sun <way@Eng.Auburn.EDU>
• Re: qcam on NetBSD
  • From: nelson@crynwr.com (Russell Nelson)
• Re: assembly language and unrolling loops
  • From: Paul Chinn <loomer@1000klub.com>
• Re: qcam on NetBSD
  • From: Jani Mattsson <jmattsso@niksula.hut.fi>
• Re: qcam on DOS
  • From: Way Sun <way@Eng.Auburn.EDU>
• Re: assembly language and unrolling loops
  • From: nelson@crynwr.com (Russell Nelson)
• Re: qcam on NetBSD
  • From: nelson@crynwr.com (Russell Nelson)
• Re: assembly language and unrolling loops
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: qcam on NetBSD
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: qcam on NetBSD
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• xqcam speed figures
  • From: Wim Lewis <wiml@hhhh.org>
• Re: qcam on NetBSD
  • From: bruce@staff.cs.su.oz.au (Bruce Janson)
• remote control
  • From: bruce@staff.cs.su.oz.au (Bruce Janson)
• forwarded message from MIHL@wvnvm.wvnet.edu
  • From: nelson@crynwr.com (Russell Nelson)
• xqcam speed figures
  • From: nelson@crynwr.com (Russell Nelson)
• Re: remote control
  • From: root <root@martian.rt66.com>
• Re: remote control
  • From: nelson@crynwr.com (Russell Nelson)
• Re: qcam on NetBSD
  • From: scott@laird.com (Scott Laird)
• Improved Iggy Page
  • From: Lee Maisel <martian@martian.rt66.com>
• Speed, and remote control
  • From: Wim Lewis <wiml@hhhh.org>
• forwarded message from MIHL@wvnvm.wvnet.edu
  • From: nelson@crynwr.com (Russell Nelson)
• Problems using QuickCam w/ new IO card...
  • From: Steve Philp <sphilp@allinux1.alliance.net>
• new kernel module...
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• xfqcam 1.0 released
  • From: loomer@1000klub.com (Paul Chinn)
• No Subject
  • From: Kent Thompson <kent@up.edu>
• Re: xfqcam 1.0 released
  • From: aoster <alster@interport.net>
• Re: xfqcam 1.0 released
  • From: Paul Chinn <loomer@1000klub.com>
• Re: xfqcam 1.0 released
  • From: wiml@hhhh.org (Wim Lewis)
• erk! qfcam 1.0 is hosed in unidirectional mode
  • From: loomer@1000klub.com (Paul Chinn)
• fix for unidir xfqcam
  • From: loomer@1000klub.com (Paul Chinn)
• erk! qfcam 1.0 is hosed in unidirectional mode
  • From: nelson@crynwr.com (Russell Nelson)
• Re: xfqcam 1.0 released
  • From: root <root@martian.rt66.com>
• Re: erk! qfcam 1.0 is hosed in unidirectional mode
  • From: Paul Chinn <loomer@1000klub.com>
• Re: erk! qfcam 1.0 is hosed in unidirectional mode
  • From: nelson@crynwr.com (Russell Nelson)
• Re: erk! qfcam 1.0 is hosed in unidirectional mode
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• xfqcam 1.01
  • From: loomer@1000klub.com (Paul Chinn)
• Re: xfqcam 1.01
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• anyone workin' on NV?
  • From: loomer@1000klub.com (Paul Chinn)
• Re: anyone workin' on NV?
  • From: scott@laird.com (Scott Laird)
• stuff
  • From: nelson@crynwr.com (Russell Nelson)
• Re: stuff
  • From: scott@laird.com (Scott Laird)
• Re: stuff
  • From: loomer@1000klub.com (Paul Chinn)
• qclose hack
  • From: Brent Earl <earl@localhost.cig.mot.com>
• system load causing white flashes
  • From: loomer@1000klub.com (Paul Chinn)
• system load causing white flashes
  • From: "Reuven M. Lerner" <reuven@mail.netvision.net.il>
• QuickCam Problems [OffTopic?]
  • From: Sujal Patel <smpatel@wam.umd.edu>
• quiet list
  • From: Paul Chinn <loomer@1000klub.com>
• quiet list
  • From: nelson@crynwr.com (Russell Nelson)
• Re: quiet list
  • From: aoster <alster@interport.net>
• CUSEEME?
  • From: Bill <bill@xmission.com>
• Re: quiet list
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• re: load brightness, videoconferencing
  • From: Paul Chinn <loomer@1000klub.com>
• vic for linux with qcam
  • From: Koji OKAMURA <oka@is.aist-nara.ac.jp>
• Re: quiet list
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• wireless quickcam
  • From: Brett Hays <bhays@hsonline.net>
• Quick qcam Question...
  • From: "Christopher M. DiPierro" <cdipierr@wam.umd.edu>
• re: load brightness, videoconferencing
  • From: Paul Haas <paulh@hamjudo.com>
• Re: quiet list
  • From: "James W. Bennett" <jimb@tara-lu.com>
• Re: wireless quickcam
  • From: root <root@martian.rt66.com>
• Re: wireless quickcam
  • From: Brett Hays <bhays@hsonline.net>
• NV Patches.. please submit them to me
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• subscribe tserreyn@uucom.com
  • From: Ted Serreyn <tserreyn@uucom.com>
• re: load & brightness
  • From: Paul Chinn <loomer@1000klub.com>
• Frame Rate
  • From: "Adam L. Seligman" <adams@cs.utexas.edu>
• Re: Frame Rate
  • From: loomer@1000klub.com (Paul Chinn)
• re: load & brightness
  • From: Sujal Patel <smpatel@wam.umd.edu>
• NV binaries for linux available
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• shocking discovery on par with polio vaccine.
  • From: Paul Chinn <loomer@1000klub.com>
• shocking discovery on par with polio vaccine.
  • From: nelson@crynwr.com (Russell Nelson)
• I/R with the quickcam
  • From: Nat Friedman <ndf@aleph1.mit.edu>
• I/R with the qcam
  • From: Nat Friedman <ndf@aleph1.mit.edu>
• Re: shocking discovery on par with polio vaccine.
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: shocking discovery on par with polio vaccine.
  • From: nelson@crynwr.com (Russell Nelson)
• IR
  • From: Bob Maccione <bmaccion@promus.com>
• stepper motor and swivel?
  • From: grouchy@eagle.ais.net (Brent Earl)
• Re: load & brightness
  • From: Kent Moat <kmoat@moorhead.corp.mot.com>
• I/R with the qcam
  • From: nelson@crynwr.com (Russell Nelson)
• Re: load & brightness
  • From: Sujal Patel <smpatel@wam.umd.edu>
• Re: stepper motor and swivel?
  • From: Mehmet T Avcioglu <mta59066@pegasus.cc.ucf.edu>
• Re: stepper motor and swivel?
  • From: Wim Lewis <wiml@hhhh.org>
• Re: stepper motor and swivel?
  • From: chow@cc.gatech.edu (David D. Chow)
• SGI video ioctls
  • From: Brandon High <bjhigh@ccnet.com>
• Re: stepper motor and swivel?
  • From: Wim Lewis <wiml@hhhh.org>
• Re: SGI video ioctls
  • From: maddog@ai.mit.edu (His name was Matthew Marjanovic...)
• Auto Brightness control
  • From: Kaj Groner <kaj@boxer.com>
• Auto-Brightness
  • From: Jonathan Bradshaw <jonathan@NrgUp.Com>
• Re: load & brightness
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: load & brightness
  • From: Sujal Patel <smpatel@wam.umd.edu>
• Re: Auto-Brightness
  • From: loomer@1000klub.com (Paul Chinn)
• Re: load & brightness
  • From: scott@laird.com (Scott Laird)
• Auto-bright, Frame Rate, and success!
  • From: root <root@tippy.gll.com>
• Re: Auto-Brightness
  • From: "Lee M. Maisel" <martian@rt66.com>
• mpeg encoder
  • From: loomer@1000klub.com (Paul Chinn)
• Re: Auto-Brightness
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• Re: stepper motor and swivel?
  • From: Craig Milo Rogers <rogers@ISI.EDU>
• xfqcam 1.02
  • From: loomer@1000klub.com (Paul Chinn)
• Re: load & brightness
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Quickcam not found with XFqcam!!
  • From: Brandon High <bjhigh@ccnet.com>
• Re: Quickcam not found with XFqcam!!
  • From: Brandon High <bjhigh@ccnet.com>
• Re: Quickcam not found with XFqcam!!
  • From: "Lee M. Maisel" <martian@rt66.com>
• Re: mpeg encoder
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• Re: mpeg encoder
  • From: nelson@santafe.edu (Nelson Minar)
• Re: Quickcam not found with XFqcam!!
  • From: nelson@santafe.edu (Nelson Minar)
• Re: mpeg encoder
  • From: nelson@crynwr.com (Russell Nelson)
• Re: Auto-brightness
  • From: nelson@santafe.edu (Nelson Minar)
• Re: mpeg encoder
  • From: nelson@santafe.edu (Nelson Minar)
• XFqcam
  • From: Jonathan Bradshaw <jonathan@NrgUp.Com>
• Re: XFqcam
  • From: Brandon High <bjhigh@ccnet.com>
• Re: XFqcam
  • From: James Walter Martin III <jwm3@jwm3.org>
• Re: XFqcam
  • From: nelson@santafe.edu (Nelson Minar)
• unsubscribe
  • From: "Theodore C. Yapo" <yapot@ix.netcom.com>
• Re: mpeg encoder
  • From: Paul Chinn <loomer@1000klub.com>
• xfqcam not auto detecting cameras
  • From: Paul Chinn <loomer@1000klub.com>
• Re: xfqcam not auto detecting cameras (fwd)
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: mpeg encoder
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: XFqcam
  • From: nelson@crynwr.com (Russell Nelson)
• Re: mpeg encoder
  • From: nelson@santafe.edu (Nelson Minar)
• Movies...
  • From: Brandon High <bjhigh@ccnet.com>
• Re: mpeg encoder
  • From: chow@cc.gatech.edu (David D. Chow)
• Re: XFqcam
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: XFqcam
  • From: Brandon High <bjhigh@ccnet.com>
• unsubscribe
  • From: James Antoniou <boethius@step.mother.com>
• Re: XFqcam
  • From: scott@laird.com (Scott Laird)
• Re: mpeg encoder
  • From: Craig Milo Rogers <rogers@ISI.EDU>
• Re: mpeg encoder / recording
  • From: Paul Chinn <loomer@1000klub.com>
• No Subject
  • From: "Thomas 'Dent' Mirlacher" <dent@wst.edvz.sbg.ac.at>
• Greetings all, how about a mirror?
  • From: "Adam W. Dace" <thekind@NETural.com>
• How to do CU-SeeMe under Linux
  • From: Nelson Minar <nelson@santafe.edu>
• No Subject
  • From: Oliver Hager <hager@tantal.ping.de>
• disk dilema
  • From: Paul Chinn <loomer@1000klub.com>
• Update on CU-SeeMe
  • From: nelson@santafe.edu (Nelson Minar)
• Re: disk dilema
  • From: "Roger A. Unwin" <unwin@spunky.roadkill.com>
• Re: Update on CU-SeeMe
  • From: chow@cc.gatech.edu (David D. Chow)
• Movies and auto-brightness
  • From: Brandon High <bjhigh@ccnet.com>
• Re: Update on CU-SeeMe
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• Re: Update on CU-SeeMe
  • From: Mehmet T Avcioglu <mta59066@pegasus.cc.ucf.edu>
• Even more on CU-SeeMe
  • From: nelson@santafe.edu (Nelson Minar)
• Re: Even more on CU-SeeMe
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• CU-SeeMe: vdorm.taponline.com reflector
  • From: nelson@santafe.edu (Nelson Minar)
• so, what now?
  • From: nelson@santafe.edu (Nelson Minar)
• Cuseeme reflector up and running?
  • From: "Adam W. Dace" <thekind@NETural.com>
• Re: so, what now?
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: so, what now?
  • From: Sujal Patel <smpatel@wam.umd.edu>
• Xfqcam problem, FYI.
  • From: Frank Mayhar <frank@exit.com>
• Re: Xfqcam problem, FYI.
  • From: scott@laird.com (Scott Laird)
• Decoding in bidirectional mode: 4bpp?
  • From: Nelson Minar <nelson@santafe.edu>
• Re: Decoding in bidirectional mode: 4bpp?
  • From: Brandon High <bjhigh@ccnet.com>
• .
  • From: fleming@aztec.asu.edu (BILL FLEMING)
• Re: Decoding in bidirectional mode: 4bpp?
  • From: Craig Milo Rogers <rogers@ISI.EDU>
• What should I get?
  • From: Ben Sinclair <ben@netins.net>
• Re: What should I get?
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Problem with QC... White picture?
  • From: Steve Philp <sphilp@allinux1.alliance.net>
• real-world experience with QuickCam in the kernel
  • From: Paul Traina <pst@shockwave.com>
• Re: real-world experience with QuickCam in the kernel
  • From: Sujal Patel <smpatel@wam.umd.edu>
• Re: real-world experience with QuickCam in the kernel
  • From: "Matthew N. Dodd" <winter@jurai.net>
• Re: real-world experience with QuickCam in the kernel
  • From: Sujal Patel <smpatel@wam.umd.edu>
• Re: real-world experience with QuickCam in the kernel
  • From: Paul Traina <pst@shockwave.com>
• CUSEEME, SEEME, but no CU.
  • From: Bill <bill@xmission.com>
• autodetection works 100% of the time for me, AFTER...
  • From: Paul Traina <pst@shockwave.com>
• More stuff...
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: real-world experience with QuickCam in the kernel
  • From: nelson@santafe.edu (Nelson Minar)
• Linux module v0.1
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Re: Linux module v0.1
  • From: anthony@rumble.waratah.id.au (Anthony Rumble)
• Re: XFqcam
  • From: Ken Edwards <edwards@xon.cuug.ab.ca>
• Subscribe
  • From: Jim Ryan <ryan@milford.mv.com>
• RE: More stuff...
  • From: Lser\k)D, <dgdimick@deltanet.com>
• RE: More stuff...
  • From: Brandon High <bjhigh@ccnet.com>
• Re: More stuff...
  • From: scott@laird.com (Scott Laird)
• RE: More stuff... (fwd)
  • From: "Sgt Daniel W. Erskine" <derskine@caesar.safb.af.mil>
• RE: More stuff...
  • From: Brett Hays <bhays@hsonline.net>
• mail failed, returning to sender (fwd)
  • From: emf@scf.nmsu.edu (discursive melancholia)
• Re: More stuff... (fwd)
  • From: Raymond Rusk <rrusk@mace.ns.uvic.ca>
• No Subject
  • From: "Sgt Daniel W. Erskine" <derskine@caesar.safb.af.mil>
• Re: More stuff... (fwd)
  • From: Lser\k)D, <dgdimick@deltanet.com>
• How to get off the list
  • From: nelson@crynwr.com (Russell Nelson)
• Re: (no subject)
  • From: "David Stewart" <dtr1@gate.net>
• Re: How to get off the list
  • From: Brandon High <bjhigh@ccnet.com>
• QuickCam Info
  • From: "Brooks G. Dorroh" <bgd@cts.com>
• Re: How to get off the list
  • From: James Walter Martin III <jwm3@gti.net>
• unsubscribe
  • From: "David Stewart" <dtr1@gate.net>
• Administrivia
  • From: nelson@ns.crynwr.com
• CUSEEME under Wine?
  • From: Bill <bill@xmission.com>
• FAQ ?
  • From: Aram Mirzadeh <awm@qosina.com>
• Re: FAQ ?
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: FAQ ?
  • From: scott@laird.com (Scott Laird)
• quickcam....
  • From: Jauder Ho <jauderho@umich.edu>
• Prices
  • From: Brandon High <bjhigh@ccnet.com>
• New QuickCam picture site
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: New QuickCam picture site
  • From: Chris DiPierro <cdipierr@biteme.dorm.umd.edu>
• Re: New QuickCam picture site
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Screensaver
  • From: "Adam L. Seligman" <adams@cs.utexas.edu>
• trip cam page
  • From: grouchy@eagle.ais.net (Brent Earl)
• No Subject
  • From: Dave Mitchell <davem@magnet.com>
• configuration help
  • From: "Aram W. Mirzadeh" <awm@qosina.com>
• Re: configuration help
  • From: Mirza Wasim Hassan Baig <wasim@cephas.com>
• Re: configuration help
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• bidirectional madness
  • From: Dave Mitchell <davem@magnet.com>
• Re: configuration help
  • From: Brandon High <bjhigh@ccnet.com>
• Re: configuration help
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: configuration help
  • From: Chris DiPierro <cdipierr@biteme.dorm.umd.edu>
• Re: configuration help
  • From: Koji OKAMURA <oka@is.aist-nara.ac.jp>
• Re: configuration help
  • From: "James R. Ullman" <james@www.gens.no>
• Re: configuration help
  • From: Mirza Wasim Hassan Baig <wasim@cephas.com>
• Re: configuration help
  • From: nelson@santafe.edu (Nelson Minar)
• 4bpp bidirectional mode
  • From: nelson@santafe.edu (Nelson Minar)
• unsubscribe
  • From: Ben Sinclair <Ben@netins.net>
• Re: configuration help
  • From: "Aram W. Mirzadeh" <awm@qosina.com>
• Re: bidirectional madness
  • From: Dave Mitchell <davem@magnet.com>
• (U) qcam with AIX and QuickCam plug size
  • From: "Neil Kolban" <kolban@VNET.IBM.COM>
• (U) Changes required for AIX qcam library
  • From: "Neil Kolban" <kolban@VNET.IBM.COM>
• FreeBSD nv & vic patches
  • From: Peter Grehan <grehan@Ipsilon.COM>
• qcam for FreeBSD -- packaged
  • From: "Adam W. Dace" <thekind@NETural.com>
• Re: FreeBSD nv & vic patches
  • From: Koji OKAMURA <oka@is.aist-nara.ac.jp>
• By jove it works!
  • From: "Adam W. Dace" <thekind@NETural.com>
• xqcam question
  • From: emf@scf.nmsu.edu (discursive melancholia)
• Re: By jove it works!
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Yes!
  • From: nelson@crynwr.com
• Re: Yes!
  • From: Thomas Davis <Thomas.Davis@mnscorp.com>
• Is the list dead?
  • From: "Lee M. Maisel" <martian@rt66.com>
• Re: Is the list dead?
  • From: Brandon High <bjhigh@ccnet.com>
• Re: Is the list dead?
  • From: scott@laird.com (Scott Laird)
• linux/python quickcam
  • From: Dave Mitchell <davem@magnet.com>
• Re: linux/python quickcam
  • From: chow@cc.gatech.edu (David D. Chow)
• Help
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• frameserv and clients
  • From: "matthew c. mead" <mmead@Glock.COM>
• Re: Help
  • From: scott@laird.com (Scott Laird)
• Quickcam to ethernet, via stripped Linux box.
  • From: Paul Haas <paulh@hamjudo.com>
• Quickcam to ethernet, via stripped Linux box.
  • From: nelson@crynwr.com
• qcframeserv very pre-alpha
  • From: "matthew c. mead" <mmead@Glock.COM>
• WICKED!! Q-cam SERVER!
  • From: Martian <martian@Rt66.com>
• Creation of Drivers for other UNIX Workstations...
  • From: "Michael W. Chalkley" <mikech@avana.net>
• Creation of Drivers for other UNIX Workstations...
  • From: nelson@crynwr.com
• subscribe
  • From: heiko@brewhr.swb.de (Heiko Rath)
• Re: Creation of Drivers for other UNIX Workstations... (fwd)
  • From: "Michael W. Chalkley" <mikech@tiger.avana.net>
• My QuickCam on the Web (a little different...)
  • From: Jered J Floyd <jered@mit.edu>
• Re: My QuickCam on the Web (a little different...)
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: My QuickCam on the Web (a little different...)
  • From: Jered Floyd <jered@mit.edu>
• More about my QuickCam, live server push...
  • From: Jered J Floyd <jered@mit.edu>
• Re: More about my QuickCam, live server push...
  • From: Jon Lewis <jlewis@inorganic5.fdt.net>
• Re: More about my QuickCam, live server push...
  • From: Jered Floyd <jered@mit.edu>
• Re: More about my QuickCam, live server push...
  • From: grouchy@eagle.ais.net (Brent Earl)
• Re: Linux module v0.1
  • From: Koji OKAMURA <oka@is.aist-nara.ac.jp>
• Quickcam stereo...
  • From: Kent Thompson <kent@up.edu>
• Re: Quickcam stereo...
  • From: Doug White <dwhite@riley-net170-164.uoregon.edu>
• Re: Quickcam stereo...
  • From: Doug White <dwhite@riley-net170-164.uoregon.edu>
• anyone gotten information from Connectix yet?
  • From: Paul Traina <pst@shockwave.com>
• Re: anyone gotten information from Connectix yet?
  • From: Dave Mitchell <davem@magnet.com>
• Re: anyone gotten information from Connectix yet?
  • From: Paul Traina <pst@shockwave.com>
• OS independant QuickCam driver (FreeBSD top end, but generic back end)
  • From: Paul Traina <pst@Shockwave.COM>