qcam b/w on linux

• To: quickcam-drivers@crynwr.com
• Subject: qcam b/w on linux
• From: marc ferraton <mferrato@hol.fr>
• Date: Thu, 10 Jul 1997 04:38:52 +0200
• Delivered-To: quickcam-drivers@crynwr.com
• Sender: fet@lebarde.edfsim.fr

sorry for my bad english
please
I find someone witch has installed a quickcam camera B/W on linux 1.2.13
Main board is HOT-433 486dx100 PCI/ISA

i use qcam release qcam-0.3 no success
                   qcam-0_7c-5 little success but no image  allways 0
                   qcam-0.7d   little success but no image  allways 0

eg messages :
setscanmode(01011000)
setscanmode(00100000)
Scanning from QuickCam at 0x378 at 320x240 (2:1) @ 6bpp
setscanmode(11000000)
Command 0x0b sent, 0x00 echoed (re-read does not help)
Command 0x87 sent, 0x00 echoed (re-read does not help)
Command 0x500 sent, 0x00 echoed (re-read does not help)
Bidir 4 bpp
120 lines of 26 transfers each
setscanmode(11000000)
setscanmode(11000000)fps

who can help my ?

• Re: qcam b/w on linux
• From: Gero Wedemann <Gero.Wedemann@DKFZ-Heidelberg.DE>

• Prev: Re: Cable Extension
• Next: Re: qcam b/w on linux
• Index: Mail Index
• Thread: Mail Thread Index